Ready made panels comprising solid timber frame in filled with rock-wool fibre insulation and clad on both sides with top grade spruce claddings for assembly together with a full height safety glass door. Benches are flat pack.
All commercial cabins are equipped with a base plinth, extra duty benches, extra duty door (optional disabled access door).

All measurements are external measurements and are + or - 10mm.  Please allow for a minimum 25mm air gap all around all cabins.

Saunas can be erected onto the existing floor that can be vinyl,ceramic,concrete. but not carpet.

Celebration model is supplied with backrest, headrest,floormat(s) bucket & ladle, light & shade, sand timer, thermometer, towel & fragrance rack 4 fragrances plus all installation materials fixings, hardware (screws,nails,brackets) are included with comprehensive instructions for assembly, use and maintenance.

Please note sauna heaters do not operate from a 3 pin plug, they require hard wiring using high temperature silicon rubber cable to BSEN 6141. (not included)
Electricians can normally obtain this from their supplier but in case of difficulty please contact our technical department for further advice.
The length you will require depends upon the distance between where you locate your switch and the heater.

Click here to download the floor plan drawing.