Steam Shower 9007, €1,899.99 (inc. VAT)
Product Name: steam shower 9007
Product Size: 170x90x222cm
Price: €1,899.99 (inc. VAT)
Delivery: €200.00
9007 Steam Shower & Whirlpool Cabin
Steam Shower Whirlpool Cabin. The 9007 is a rectangular shaped, free-standing unit. With a huge 25cm monsoon rain shower, hand shower and riser, back jets, foot massager and of course powerful 3kw steam generator. The 9007 also has a full size Whirlpool bath, with colour changing underwater light and a headrest for your comfort. The 9007 also has two built in towel/grab rails, a soap/shampoo dispenser and two tier glass shelf. The built in radio and MP3 connection leads means you may not want to get out. The steam pod also has a special tray to allow aromatherapy products, such as eucalyptus to be used to infuse the steam - great to help relieve the symptoms of colds. The back panels of the cabin are darkened mirror glass and the front and side walls are lightly tinted.
|
|
|
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
| Package sizes: Carton 1: 1690mm x 120mm x 780mm Carton 2: 1750mm x 550mm x 950mm Carton 3: 1650mm x 120mm x 750mm Carton 4: 200mm x 320mm x 1640mm Measurements are a guide only. Package dimensions may change without notification. |
Your Delivery: Your order will be supplied on a Pallet and arrive on a lorry. The delivery will be taken to your door or as close as is possible within access restrictions (narrow gates etc). You are required to inform us of any access restrictions that may affect deliveries to your delivery location, which would require a smaller delivery vehicle. You are asked to check the goods upon arrival and inform us of any damage within 24 hours. |
Electrical: This steam shower cabin requires 2 x 13amp electrical supply. It comes with a plug and RCD fitted, however we recommend you remove the plug and have the cabin installed to a fused spur. If you have an RCD fitted within your mains board you may also remove the RCD fitted to the unit.
Water: The cabin requires 1 x hot and 1 x cold water supply. The household water pipes should be fed to a point approximately 1 metre off the floor in the corner where the cabin is to be fitted. Balanced water pressure is required, between 1-3 bar. If using a gravity fed system we recommend you use a pump, to provide the required water pressures. The steam cabin is a freestanding unit and as such we would recommend your fitter does not fit the unit into locations that mean the cabin cannot be moved away from the wall if needed. The couplings on the cabin to connect to your water supply are standard 15mm compression fittings.
Some of our products arrive in large boxes, please ensure that you have enough room to manoeuvre the boxes and their contents to the installation location. Please also consider the space required to construct the shower cabin needs to be sufficient to enable you to move around the whole unit during its assembly, before sliding into position.


















